Wing_FwdAtch_1

Wing_FwdAtch_1

Comments

Add a comment
  • John Schroeder on 2003-May-18 14:11:52 John Schroeder said


    We drilled the hole for the forward attach bolt prior to installing the bulkhead by drilling through the bracket hole. We inserted the the bolt through the phenolic, the temporary spacer block and attach bracket to keep them aligned while the micro dried. We also drilled the top and bottom holes in the phenolic for the "boomerangs". When the BID on the forward side of the bulkhead was cured, we drilled the holes thru the BID using the brackets and boomerangs and index holes in the phenolic for alignment. After the BID on the aft side was installed and cured, we drilled from the forward side and installed the 3 bolts in the left and right sides. We then drilled the remainder of the holes through the boomerang and inserted all bolts.

Photo info

Popular tags

  • 1 photos are tagged with aileron
  • 1 photos are tagged with casting
  • 2 photos are tagged with counterweight
  • 2 photos are tagged with Demo
  • 1 photos are tagged with elevator
  • 1 photos are tagged with ES
  • 2 photos are tagged with Factory
  • 1 photos are tagged with inventory
  • 1 photos are tagged with John
  • 7 photos are tagged with Lancair
  • 2 photos are tagged with loading
  • 1 photos are tagged with parts
  • 4 photos are tagged with pre build
  • 2 photos are tagged with Ride
  • 1 photos are tagged with Ron
  • 6 photos are tagged with Schroeder
  • 1 photos are tagged with Super
  • 6 photos are tagged with Super ES
  • 6 photos are tagged with Szot

Random image